Cisco Cisco ASR 5000
GGSN Service Configuration Mode Commands
▀ cc behavior
▄ Command Line Interface Reference, StarOS Release 18
5220
cc behavior
Configures the 3GPP behavior bits associated with the GGSN’s charging characteristics (CC).
Product
GGSN
Privilege
Security Administrator, Administrator
Mode
Exec > Global Configuration > Context Configuration > GGSN Service Configuration
configure > context context_name > ggsn-service service_name
Entering the above command sequence results in the following prompt:
[context_name]host_name(config-ggsn-service)#
Syntax
cc behavior no-records nr_value
default cc behavior
no cc behavior no-records
default
Restores behavior parameters to default value of 0 (disabled).
no
Removes the previously configured behavior bit.
no-records
nr_value
Default: 0 (disabled)
Specifies the behavior bit upon which the GGSN ceases sending accounting records to a server.
Specifies the behavior bit upon which the GGSN ceases sending accounting records to a server.
nr_value
can be configured to an integer from 1 through 12 corresponding to the 12 behavior bits – B1
through B12.
Usage
3GPP standards after 3GPP R98 included 12 behavior bits as part of GGSN charging characteristics. Like the
charging characteristics profile index, the behavior bits are sent by the SGSN to the GGSN in the Create PDP
Context request message.
This command configures the behavior bits for each of the conditions described.
charging characteristics profile index, the behavior bits are sent by the SGSN to the GGSN in the Create PDP
Context request message.
This command configures the behavior bits for each of the conditions described.
Example
The following command configures a behavior bit of 10 for no-records:
cc behavior no-records 10