Cisco Cisco ASR 5000
GGSN Service Configuration Mode Commands
▀ ip qos-dscp
▄ Command Line Interface Reference, StarOS Release 18
5252
ip qos-dscp
Configures the quality of service (QoS) differentiated service code point (DSCP) used when sending data packets over
the Gn interface.
the Gn interface.
Product
GGSN
Privilege
Security Administrator, Administrator
Mode
Exec > Global Configuration > Context Configuration > GGSN Service Configuration
configure > context context_name > ggsn-service service_name
Entering the above command sequence results in the following prompt:
[context_name]host_name(config-ggsn-service)#
Syntax
ip qos-dscp { gtpc dscp | qci { 1 | 2 | 3 | 4 | 9 dscp } | qci { 5 | 6 | 7 | 8 { dscp |
allocation-retention-priority { 1 | 2 | 3 } dscp } } } +
allocation-retention-priority { 1 | 2 | 3 } dscp } } } +
default ip qos-dscp
no ip qos-dscp { gtpc | qci { 1 | 2 | 3 | 4 | 9 } | qci { 5 | 6 | 7 | 8 [ allocation-
retention-priority { 1 | 2 | 3 } ] } } +
retention-priority { 1 | 2 | 3 } ] } } +
default
Restores the GGSN IP parameters to the default settings.
Default GTP-C DSCP:
Default GTP-C DSCP:
be
Default QCI/DSCP:
1: ef
2: ef
3: af11
4: af11
5: ef
6: ef
7: af21
8: af21
9: be
no
Removes a specified QoS setting and returns it to its default setting.
gtpc
Configures the DSCP marking to be used for GTP-C messages. Must be followed by a DSCP marking.