Cisco Cisco ASR 5000

 

▄  Command Line Interface Reference, StarOS Release 18 

Configures the congestion control threshold values that are to be monitored. 

 

All 

 

Security Administrator, Administrator 

 

Exec > Global Configuration 

 

Entering the above command sequence results in the following prompt: 

[local]host_name(config)# 

 

congestion-control threshold { license-utilization percent | max-sessions-per-service-
utilization percent | message-queue-utilization percent | message-queue-wait-time time | 
port-rx-utilization percent | port-specific { slot/port | all } [ tx-utilization percent 
] [ rx-utilization percent ] port-specific-rx-utilization critical | port-specific-tx-
utilization critical | port-tx-utilization percent | service-control-cpu-utilization 
percent | system-cpu-utilization percent | system-memory-utilization percent | tolerance 
percent } 

default congestion-control threshold { license-utilization | max-sessions-per-service-
utilization | message-queue-utilization | message-queue-wait-time | port-rx-utilization | 
port-specific | tx-utilization | rx-utilization | port-tx-utilization | service-control-
cpu-utilization | system-cpu-utilization | system-memory-utilization | tolerance } 

no congestion-control threshold port-specific { slot/port | all } 

no congestion-control threshold port-specific { slot/port | all } [ rx-utilization 
percent ] [ tx-utilization percent ] 

no congestion-control threshold port-specific-rx-utilization critical 

no congestion-control threshold port-specific-tx-utilization critical 

no congestion-control threshold { message-queue-utilization | message-queue-wait-time | 
port-rx-utilization percent | port-tx-utilization percent | service-control-cpu-
utilization | system-cpu-utilization | system-memory-utilization } 

 

Sets the threshold keyword to its default value. 

 

This command disables port specific threshold monitoring on the specified port or on all ports. 

: Specifies the port for which port specific threshold monitoring is being configured. The slot and 

port must refer to an installed card and port.