Cisco Cisco ASR 5000

Page of 9109
Global Configuration Mode Commands (T-threshold phspc)   
▀  tech-support test-commands password 
 
 
▄  Command Line Interface Reference, StarOS Release 18 
5588 
   
tech-support test-commands password 
Configures the password that protects access to the 
cli test-commands
 mode in the Exec mode and Global 
Configuration mode. This command is only visible to a user logged in as a Security Administrator. 
Product
 
All 
Privilege
 
Security Administrator 
Caution:
  The cli test-commands are for use by or under the supervision of Cisco TAC. 
Mode
 
Exec > Global Configuration 
configure
 
Entering the above command sequence results in the following prompt: 
[local]host_name(config)# 
Syntax
 
tech-support test-commands [encrypted] password new_password 
no tech-support test-commands password 
no
 
Disables the use of a test-commands password. All subsequent attempts to execute 
cli test-commands
 in 
Exec or Global Configuration modes will fail. 
Default: no password, access disabled 
[encrypted]
 
If this optional keyword is specified, the 
new_password
 is interpreted as an encrypted string containing the 
password value. If the encrypted keyword is not specified, then 
new_password
 is interpreted as the actual 
plain text value. In the output of 
show configuration
 and 
save configuration
 commands, only the 
encrypted option of this command syntax appears. 
new_password
 
Specifies the password to be used when executing the 
cli test-commands
 command in Exec or Global 
Configuration modes. For a plain text password, 
new_password
 is an alphanumeric string of 1 through 64 
characters. For an encrypted password, 
new_password
 is an alphanumeric string of 1 through 524 
characters. 
If a password is not entered via this command, the 
cli test-commands
 command remains disabled in the 
Exec and Global Configuration modes. 
Default: no password, access disabled 
Important:
  An SNMP trap is generated when an administrator enters or edits a password via this command 
(starTechSupportPasswordChanged). Refer to the SNMP MIB Reference for additional information.