Cisco Cisco ASR 5000
Global Configuration Mode Commands (T-threshold phspc)
threshold card-temperature-near-power-off-limit ▀
Command Line Interface Reference, StarOS Release 18 ▄
5635
threshold card-temperature-near-power-off-limit
Configures alarm or alert thresholds for triggering and clearing high card temperature alarms.
Product
All
Privilege
Security Administrator, Administrator
Mode
Exec > Global Configuration
configure
Entering the above command sequence results in the following prompt:
[local]host_name(config)#
Syntax
threshold card-temperature-near-power-off-limithigh_temp [ clear low_temp ]
high_thresh
Default: 0
Specifies the high card temperature (in degrees Celsius) that must be met or exceeded within the polling
interval to generate an alert or alarm.
Specifies the high card temperature (in degrees Celsius) that must be met or exceeded within the polling
interval to generate an alert or alarm.
high_thresh
is an integer from 0 through 100. A value of 0 disables the threshold.
clear
low_thresh
Default: 0
Specifies the low card temperature (in degrees Celsius) before a high temperature alarm is cleared.
Specifies the low card temperature (in degrees Celsius) before a high temperature alarm is cleared.
low_thresh
is an integer from 0 through 100. A value of 0 disables the threshold.
Important:
This value is ignored for the Alert model. In addition, if this value is not configured for the Alarm
model, the system assumes it is identical to the high threshold.
Usage
Set the high and low temperatures in degrees Celsius that generate and clear alarms.
Example
The following command configures sets the high and low temperatures to
40
and
35
degrees:
threshold card-temperature-near-power-off-limit 40 clear 35