Cisco Cisco ASR 5000

Page of 9109
Global Configuration Mode Commands (T-threshold phspc)   
▀  threshold cpu-orbs-warn 
 
 
▄  Command Line Interface Reference, StarOS Release 18 
5650 
   
threshold cpu-orbs-warn 
Configures thresholds for generating warning-level alerts or alarms based on the percentage of CPU utilization by the 
Object Request Broker System (ORBS) software task. 
Product
 
All 
Privilege
 
Security Administrator, Administrator 
Mode
 
Exec > Global Configuration 
configure
 
Entering the above command sequence results in the following prompt: 
[local]host_name(config)# 
Syntax
 
threshold cpu-orbs-warn high_thresh [ clear low_thresh ] 
[ default ] threshold cpu-orbs-warn 
default
 
Restores this parameter to its default setting. 
high_thresh
 
Default: 50 
Specifies the high threshold percent of CPU utilization by the ORBS software task that must be exceeded as 
measured at the time of polling to generate a warning-level alert or alarm. 
high_thresh
 is measured in percentage of total CPU utilization and is an integer from 0 through 100. A 
value of 0 disables the threshold. 
clear
 
low_thresh
 
Default: 50 
Specifies the low threshold percent of CPU utilization by the ORBS software task that maintains a previously 
generated alarm condition. If the percentage is measured as less than or equal to Specifies the low threshold 
at the time of polling, a clear alarm will be generated. 
low_thresh 
is measured in percentage of total CPU utilization and is an integer from 0 through 100. A 
value of 0 disables the threshold. 
Important:
  This value is ignored for the Alert model. In addition, if this value is not configured for the Alarm 
model, the system assumes it is identical to Specifies the low threshold.