Cisco Cisco ASR 5000
GPRS Service Configuration Mode Commands
sgsn-number ▀
Command Line Interface Reference, StarOS Release 18 ▄
6065
sgsn-number
Define the SGSN E.164 number to be used when interacting via MAP protocol for this GPRS service.
Product
SGSN
Privilege
Security Administrator, Administrator
Mode
Exec > Global Configuration > Context Configuration > GPRS Service Configuration
configure > context context_name > gprs-service service_name
Entering the above command sequence results in the following prompt:
[context_name]host_name(config-gprs-service)#
Syntax
sgsn-number sgsn_number
no sgsn-number
no
Disables the use of this definition in the system configuration.
sgsn-number
Enter a string of 1 to 16 digits to identify the SGSN’s E.164 identification.
Usage
Use this command to identify the ISDN number for the SGSN associated with this GPRS service.
The SGSN supports multiple SGSN numbers – different numbers in the 2G GPRS service configuration and
the the 3G SGSN service configuration. If an HLR-initiated dialog is received, the SGSN will perform a
lookup based on the IMSI and find the correct SGSN number with which the MS is associated. Subsequent
messaging will use this address.
The SGSN supports multiple SGSN numbers – different numbers in the 2G GPRS service configuration and
the the 3G SGSN service configuration. If an HLR-initiated dialog is received, the SGSN will perform a
lookup based on the IMSI and find the correct SGSN number with which the MS is associated. Subsequent
messaging will use this address.
Example
Disable the E.164 number for this GPRS service.
no sgsn-number