Cisco Cisco ASR 5000
Gs Service Configuration Mode Commands
bssap+ ▀
Command Line Interface Reference, StarOS Release 18 ▄
6083
bssap+
This command defines the Base Station System Application Part Plus configuration parameters for the Gs service to
enable the SGSN to access a Visitor Location Register(s) (VLRs).
enable the SGSN to access a Visitor Location Register(s) (VLRs).
Product
SGSN
Privilege
Security Administrator, Administrator
Mode
Exec > Global Configuration > Context Configuration > Gs Service Configuration
configure > context context_name > gs-service service_name
Entering the above command sequence results in the following prompt:
[context_name]host_name(config-gs-service)#
Syntax
bssap+ ssn ss_num
no bssap+ ssn ss_num
no
Removes the configured BSSAP+ subsystem number from this Gs service.
ssn ss_num
Specifies the subsystem number to configure in this Gs interface to use BSSAP+.
ss_num
must be an integer from 1 through 255.
Usage
Use this command to configure the BSSAP+ subsystem with Gs interface in this service to communicate with
VLR(s).
VLR(s).
Important:
A single SCCP network configuration instance can not be shared with multiple Gs services.
Important:
To start a Gs service, the user needs to configure the command parameter.
Example
Following command configures subsystem 101 with BSSAP+ in this Gs service.
bssap+ ssn 101