Cisco Cisco ASR 5000

Page of 9109
GTPP Server Group Configuration Mode Commands   
▀  gtpp storage-server mode 
 
 
▄  Command Line Interface Reference, StarOS Release 18 
6198 
   
gtpp storage-server mode 
Configures the storage mode (local, remote or streaming for CDRs) to be used. Local storage mode is available with 
ASR 5000 platforms only. 
Product
 
GGSN 
P-GW 
SAEGW 
SGSN 
S-GW 
Privilege
 
Security Administrator, Administrator 
Mode
 
Exec > Global Configuration > Context Configuration > GTPP Server Group Configuration 
configure > context context_name > gtpp group group_name
 
Entering the above command sequence results in the following prompt: 
[context_name]host_name(config-gtpp-group)# 
Syntax
 
gtpp storage-server mode { local | remote | streaming [ parallel ] } 
default gtpp storage-server mode 
default
 
Returns the GTPP group configuration to the default “remote” value for the GTPP storage server mode. 
local
 
Specifies the use of the hard disk for storing CDRs. Default: Disabled 
Important:
  This option is available with ASR 5000 platforms only. 
remote
 
Specifies the use of an external server for storing CDRs. This is the default value. 
Important:
  When the external server is down, the Session Managers will start buffering up to a maximum of 
26400 CDRs or a total of 120 MB worth of CDRs, whichever limit reaches first. The maximum CDR limit specified is 
per the session manager. The chassis level limit varies depending on the number of session manager instances and 
number of active cards.