Cisco Cisco ASR 5000

Page of 9109
HA Service Configuration Mode Commands   
▀  idle-timeout-mode 
 
 
▄  Command Line Interface Reference, StarOS Release 18 
6260 
   
idle-timeout-mode 
Configures the sessions idle-timer reset behavior. 
Product
 
HA 
Privilege
 
Security Administrator, Administrator 
Mode
 
Exec > Global Configuration > Context Configuration > HA Service Configuration 
configure > context context_name > ha-service service_name
 
Entering the above command sequence results in the following prompt: 
[context_name]host_name(config-ha-service)# 
Syntax
 
idle-timeout-mode { aggressive | handoff | normal } [ upstream-only ] 
default idle-timeout-mode 
default
 
Resets the idle timeout mode to the default settings. 
aggressive
 
Resets the session idle timer only when MIP user data is detected. This is the default behavior. 
handoff
 
Resets the session idle timer when MIP user data is detected and an inter-Access Gateway/FA handoff 
occurs. 
normal
 
Resets the session idle timer when MIP user data is detected and any MIP control signaling occurs. 
upstream-only
 
Only upstream user data (data from the mobile node) resets the idle timer for the session. This is disabled by 
default. 
Usage 
Use this command to set how the current HA service resets the idle timer for a session. 
Example
 
To reset the idle timer whenever user data is detected or whenever an inter-Access Gateway/FA occurs, use 
the following command: 
idle-timeout-mode
 
handoff