Cisco Cisco ASR 5000

Page of 9109
  HSGW Service Configuration Mode Commands 
fqdn  ▀   
 
Command Line Interface Reference, StarOS Release 18  ▄  
 
   
6355 
fqdn 
Configures the Fully Qualified Domain Name (FQDN) for this HSGW service. 
Product
 
HSGW 
Privilege
 
Administrator 
Mode
 
Exec > Global Configuration > Context Configuration > HSGW Service Configuration 
configure > context context_name > hsgw-service service_name
 
Entering the above command sequence results in the following prompt: 
[context_name]host_name(config-hsgw-service)# 
Syntax
 
fqdn domain_name 
[ default | no ] fqdn  
default
 
Returns the command to the default setting of “null”. 
no
 
Removes the configured FQDN name from this service. 
domain_name
 
Specifies an FQDN for the HSGW service as an alphanumeric string of 1 through 256 characters. 
Important:
  In order to properly interact with other nodes in the network, the FQDN should be 96 alpha and/or 
numeric characters or less. 
Usage 
Use this command to configure an FQDN for this HSGW service. The FQDN is used when matching a P-GW 
with an HSGW. 
Topology Matching 
You may specify which P-GW you wish an HSGW interface to connect with by enabling topology matching 
within the FQDNs for both the HSGW service and P-GW service. Topology matching selects geographically 
closer nodes and reduces backhaul traffic for a specified interface.  
The following optional keywords enable or disable topology matching when added to the beginning of an 
FQDN: 
 
topon
.<
interface_name
>.