Cisco Cisco ASR 5000
HSGW Service RoHC Configuration Mode Commands
mrru ▀
Command Line Interface Reference, StarOS Release 18 ▄
6385
mrru
Specifies the size of the largest reconstructed reception unit that the decompressor is expected to reassemble from
segments. The size includes the CRC. If maximum received reconstructed unit (MRRU) is negotiated to be 0, no
segment headers are allowed on the channel.
segments. The size includes the CRC. If maximum received reconstructed unit (MRRU) is negotiated to be 0, no
segment headers are allowed on the channel.
Product
HSGW
Privilege
Administrator
Mode
Exec > Global Configuration > Context Configuration > HSGW Service Configuration > HSGW Service RoHC
Configuration
Configuration
configure > context context_name > hsgw-service service_name > ip header-compression rohc
Entering the above command sequence results in the following prompt:
[context_name]host_name(config-ip-header-compression-rohc)#
Syntax
mrru num_octets
default mrru
default
Resets the value of this command to its default setting of 0.
num_octets
Specifies the number of allowed octets for the MRRU as an integer from 0 through 65535. Default: 0
Usage
Use this command to set the size, in octets, of the largest reconstructed reception unit that the decompressor is
expected to reassemble from segments.
expected to reassemble from segments.
Example
The following command sets the largest reconstructed reception unit to 1024 octets:
mrru 1024
The following command resets the MRRU size to its default of 0 octets:
default mrru