Cisco Cisco ASR 5000
ACS Rulebase Configuration Mode Commands
▀ cca radius accounting interval
▄ Command Line Interface Reference, StarOS Release 18
664
cca radius accounting interval
This command allows you to configure how often interim updates are generated by the RADIUS Credit Control
Application to be sent to the prepaid server.
Application to be sent to the prepaid server.
Product
All
Privilege
Security Administrator, Administrator
Mode
Exec > ACS Configuration > Rulebase Configuration
active-charging service service_name > rulebase rulebase_name
Entering the above command sequence results in the following prompt:
[local]host_name(config-rule-base)#
Syntax
cca radius accounting interval interval
{ default | no } cca radius accounting interval
default
Configures the command with its default setting.
Default: Disabled; same as
Default: Disabled; same as
no cca radius accounting interval
no
Disables interim updates.
interval
Specifies the time interval, in seconds, between interim updates generated by the RADIUS Credit Control
Application.
Application.
interval
must be an integer from 1 through 3600.
Default: 1 (Disabled)
Usage
Use this command to specify the RADIUS accounting interval between accounting of a prepaid subscriber.
The same parameters are applicable for RADIUS server group.
The same parameters are applicable for RADIUS server group.
Example
The following command defines RADIUS accounting interval of
20
seconds for RADIUS prepaid service in
the rulebase:
cca radius accounting interval 20