Cisco Cisco ASR 5000

Page of 9109
LTE Policy Configuration Mode Commands   
▀  henbgw overload-control 
 
 
▄  Command Line Interface Reference, StarOS Release 18 
7162 
   
henbgw overload-control 
Configures HeNBGW overload control parameters. 
Product
 
HeNBGW 
Privilege
 
Administrator 
Mode
 
Exec > Global Configuration > LTE Policy Configuration 
configure > lte-policy
 
Entering the above command sequence results in the following prompt: 
[local]host_name(lte-policy)# 
Syntax
 
henbgw  overload-control [ load-reduction-indicator  percentage_value | ochl-guard-time 
minutes
 ] 
default henbgw  overload-control [ load-reduction-indicator | ochl-guard-time ] ] 
default
 
Sets/Restores the default values assigned to HeNBGW overload control parameters. The default value of load 
Reduction indication is 99 percent. 
load-reduction-indicator  percentage_value
 
Designates the percentage of HeNBs to relay overload start message if traffic load Reduction indication IE is 
not present in the overload start message. 
 percentage_value
 is the percentage value, which is an integer between 1 and 99. 
ochl-guard-time minutes
 
 Designates the guard timeout value for sending overload stop messages if overload stop message is not 
received from MME to all the HeNBs in corresponding MME’s overload control HeNBs list. 
 minutes
 is the number of minutes, which is an integer between 0 and 2147483647. 
Usage 
Use this command to configure HeNBGW overload control parameters. 
Example
 
The following command configures HeNBGW overload control parameter 
ochl-guard-time
 as 45 
minutes: 
henbgw overload-control ochl-guard-time 45