Cisco Cisco ASR 5700

Page of 8994
APN Configuration Mode Commands   
▀  cc-profile 
 
 
▄  Command Line Interface Reference, StarOS Release 17 
1304 
   
cc_group_name
 
Specifies name of the credit control group as an alphanumeric string of 1 through 63 characters. 
Creating different credit control groups enables applying different credit control configurations (DCCA 
dictionary, failure-handling, session-failover, Diameter endpoint selection, etc.) to different subscribers on the 
same system. 
Usage 
Use this command to selectively enable or disable the Gy sessions towards OCS based on the Charging 
Characteristics (CC) profile of the subscriber. When the prepaid prohibited CLI command is configured, the 
Gy messages are not triggered for postpaid subscribers. This feature is enabled by default. If APN does not 
have a specific cc-profile configured, it will fall back to “any” CC profile behavior. 
Important:
  The existing 
credit-control-group
 command within APN configuration is obsolete in 17 and 
later releases. This functionality is available as part of the 
cc-profile
 command. Also, note that the backward 
compatibility support exists for the 
credit-control-group
 CLI command. 
The Session controller stores/updates the APN configuration in the AAA manager. During the session setup, 
the session manager fills the CC value received in session authenticate request, and sends it to AAA manager. 
The AAA manager matches this against the locally stored APN configuration, and selects the desired credit-
control-group/prepaid-prohibited configuration for the session. Then the session manager passes this credit-
control-group/prepaid-prohibited information received from the AAA manager to ACS manager. 
When the local authentication (session setup request) is done, the credit-control group with the matching 
charging-characteristic is selected and used. If there is no matching charging-characteristic configuration 
found for the credit-control group selection, then the default credit-control group for the APN is selected. 
The CC based Gy Session Controlling feature is applicable only for the CC value received via GTP-Auth-
Request, and during the session establishment. The CC value updated via AAA/PCRF after the session setup 
will not cause any change in already selected credit-control group. Once the credit-control group is selected 
after session setup, this feature is not applicable. 
Example
 
The following command configures the CC value 2 as prepaid to disable Gy session: 
cc-profile 2 prepaid-prohibited