Cisco Cisco ASR 5700

Page of 8994
  APN Configuration Mode Commands 
qci  ▀   
 
Command Line Interface Reference, StarOS Release 17  ▄  
 
   
1429 
 
A GGSN call connected to this APN will not be classified as Active VoLTE unless there is network 
initiated bearer matching the VoLTE-configured QCI. 
 
VoLTE marking is preserved across a Gn-Gp handoff.  
When this feature is enabled via a CLI command, the actions are taken: 
 
During bearer creation 
 
New bearer QCI is matched against APN configuration. 
 
If the QCI matches an APN configuration, the bearer is marked for preferential treatment. 
 
Flow_entries are modified with this information (if this is first VoLTE bearer). 
 
Egtpu_session is updated with the VoLTE tag during a rx_setup request. 
 
An indication message informs ECS about the VoLTE tagging. 
 
During bearer deletion 
 
Flow_entry is updated with VoLTE information if this is the last VoLTE bearer. 
 
ECS is informed of the deletion via an indication message. 
Example
 
The following command enables preferential treatment for IMS bearers with a QCI of 9: 
qci 9 ims-media