Cisco Cisco ASR 5700
APN Profile Configuration Mode
mobility-protocol ▀
Command Line Interface Reference, StarOS Release 17 ▄
1515
mobility-protocol
This command allows you to configure the default mobility protocol type to be used for setting up a call when the AAA
server forwards an IP address directly.
server forwards an IP address directly.
Product
SaMOG
Privilege
Administrator
Mode
Exec > Global Configuration > APN Profile Configuration
configure > apn-profile profile_name
Entering the above command sequence results in the following prompt:
[local]host_name(apn-profile-profile_name)#
Syntax
mobility-protocol { gtpv1 | gtpv2 }
no mobility-protocol
no
Removes the mobility protocol configuration for this APN profile.
Usage
Use this command to configure the default mobility protocol type to be used for setting up a call when the
AAA server forwards an IP address directly. If mobility protocol is also configured under the Call Control
Profile Configuration Mode, the value configured here will override the configured value in the Call Control
profile.
By default, all APN profiles will use the mobility protocol configured under the Call Control Profile
Configuration Mode. To configure different mobility protocol values for different APN profiles, use the
AAA server forwards an IP address directly. If mobility protocol is also configured under the Call Control
Profile Configuration Mode, the value configured here will override the configured value in the Call Control
profile.
By default, all APN profiles will use the mobility protocol configured under the Call Control Profile
Configuration Mode. To configure different mobility protocol values for different APN profiles, use the
mobility-protocol
command in this configuration mode.
Example
The following command configures mobility protocol to GTPv2:
mobility-protocol GTPv2