Cisco Cisco ASR 5700

Page of 8994
  APN Profile Configuration Mode 
qos pgw-upgrade  ▀   
 
Command Line Interface Reference, StarOS Release 17  ▄  
 
   
1539 
In the case of an Attach Reject or PDN Connectivity Reject, the ESM failure cause “Operator determined 
barring” is used and the corresponding MME schema bulk statistic is incremented. 
In the case of Update Bearer Request Reject, the EGTP cause “Request rejected” is used and the 
corresponding EGTP bulk statistic is incremented. 
A session disconnect reason 
mme-qos-pgw-upgrade-reject(589)
 is incremented when QoS upgrade by 
P-GW is rejected by the MME during initial attach. The corresponding session disconnect reason statistics are 
incremented .  
Refer to the 
dedicated-bearers
 command to configure QoS controls for dedicated bearers (GBR and 
Non-GBR). 
Example
 
The following command configures the MME to reject the QOS upgrade from P-GW for non-GBR bearers: 
qos pgw-upgrade non-gbr reject