Cisco Cisco ASR 5700
BGP Configuration Mode Commands
address-family vpnv6 ▀
Command Line Interface Reference, StarOS Release 17 ▄
1645
address-family vpnv6
Enters the IPv6 VPN Address Family configuraiton mode.
Product
All
Privilege
Security Administrator, Administrator
Mode
Exec > Global Configuration > Context Configuration > BGP Configuration
configure > context context_name > router bgp as_number
Entering the above command sequence results in the following prompt:
[context_name]host_name(config-bgp)#
Syntax
address-family vpnv6
address-family vpnv6
Enters the BGP Address-Family IPv6 VPN mode to allow entry of VPN BGP parameters.
Usage
Use this command to configure the IPv6 VPN address family configuration parameters for BGP router. This
command is also used to switch the command mode to enter the BGP Address Family Configuration Mode.
Use of the
command is also used to switch the command mode to enter the BGP Address Family Configuration Mode.
Use of the
address-family vpnv6
command switches the command mode to BGP Address Family
Configuration Mode; the CLI prompt changes to:
[context_name>]host_name(config-bgp-af-vpnv6)#
Example
Use the following command to enter the BGP Address-Family configuration mode for IPv6 VPN address
parameters:
parameters:
address-family vpnv6