Cisco Cisco ASR 5700

 

Configures BGP routers that interconnect to non-broadcast networks. Note that a remote AS number must be specified 
for a neighbor before other parameters can be configured. 

 

All 

 

Security Administrator, Administrator 

 

Exec > Global Configuration > Context Configuration > BGP Configuration 

configure > context context_name > router bgp as_number

 

Entering the above command sequence results in the following prompt: 

[context_name]host_name(config-bgp)# 

 

[ no ] neighbor ip_address { activate | advertisement-interval adv_time | capability 
graceful-restart | default-originate [ route-map map_name  ] | distribute-list dist_list 
{ in | out } | ebgp-multihop [ max-hop number ] | encrypted password encrypted password | 
fall-over bfd [ multihop ] | filter-list filt_list { in | out } | max-prefix max_num [ 
threshold thresh_percent ] [ warning-only ] | next-hop-self | password password | remote-
as AS_num | remove-private-AS | restart-time rest_time | route-map map_name { in | out } 
| send-community { both | extended | standard } | shutdown | srp-activated-soft-clear | 
timers { [ connect-interval conn_time ] | [ keepalive-interval keep_time holdtime-
interval hold_time ] } | update-source ip_address | weight value } 

 

Delete the specified parameter from the router configuration. 

neighbor ip_address

 

Specifies the IP address of a BGP neighbor. 

 must be in IPv4 dotted-decimal or IPv6 colon-

separated-hexadecimal notation. 

 

Enable the exchange of routes with this neighbor. 

 

The minimum interval (in seconds) between sending BGP routing updates. 

 must be an integer 

from 0 through 600. Default: 30 

 

Configures BGP graceful restart attributes. 

map_name ]

 

Enables the origination of default routes to this neighbor