Cisco Cisco ASR 5700
Call Control Profile Configuration Mode
authenticate all-events ▀
Command Line Interface Reference, StarOS Release 17 ▄
1913
Usage
By default, authentication is not performed for any subscriber events. Use this command to enable
authentication for all types of events at one time, such as but not limited to: Activate Requests, Attach
Requests, Detach Requests, Service-Requests.
authentication for all types of events at one time, such as but not limited to: Activate Requests, Attach
Requests, Detach Requests, Service-Requests.
Important:
For the SGSN, in releases 15.0 and forward, the authentication on activation functionality has been
removed so the SGSN will not authenticate on Activate Requests.
Example
The following command configures all authentication for all subscriber events to occur every tenth time a
specific type of event occurs (for example every tenth time an Attach Request is received):
specific type of event occurs (for example every tenth time an Attach Request is received):
authenticate all-events frequency 10
The following command configures authentication for all Detach Requests and RAUs to occur if the UE
access-type is UMTS:
access-type is UMTS:
authenticate all-events access-type umts