Cisco Cisco ASR 5700

Page of 8994
  Call Control Profile Configuration Mode 
gmm rau-accept  ▀   
 
Command Line Interface Reference, StarOS Release 17  ▄  
 
   
1957 
gmm rau-accept 
Provides the configuration to set the Follow-On Proceed (FOP) bit in the Routing Area Update Accept (RAU) message.  
Product
 
SGSN 
Privilege
 
Security Administrator, Administrator 
Mode
 
Exec > Global Configuration > Call Control Profile Configuration 
configure > call-control-profile profile_name
 
Entering the above command sequence results in the following prompt: 
[local]host_name(config-call-control-profile-profile_name)# 
Syntax
 
gmm rau-accept follow-on-proceed { on-following-nw-procedure | only-on-ue-request } 
remove gmm rau-accept follow-on-proceed 
remove
 
Disables the SGSN from sending the Follow On Proceed bit in the RAU response.  
follow-on-proceed
 
This keyword configures the SGSN to send FOP bit in RAU Accept message. 
on-following-nw-procedure
 
This keyword configures the SGSN to send FOP bit when there is a following Network Procedure. 
only-on-ue-request
 
This keyword configures the SGSN to send FOP bit only when UE requests for it. 
Usage 
Use this command to configure the setting of Follow On Proceed bit in Routing Area Accept Message. The 
FOP bit can be set only when the UE requests for it by configuring the command option 
only-on-ue-
request
 or the FOP bit can be set when there is a following network procedure by configuring the CLI 
option 
on-following-nw-procedure
. By default, the configuration is 
gmm rau-accept follow-on-
proceed only-on-ue-request
.  
Example
 
Use this command to configure the SGSN to send the Follow On Proceed bit when there is a following 
Network Initiated Procedure. 
gmm rau-accept follow-on-proceed on-following-nw-procedure