Cisco Cisco ASR 5700
Call Control Profile Configuration Mode
network-initiated-pdp-activation ▀
Command Line Interface Reference, StarOS Release 17 ▄
2023
Important:
The
secondary
keyword is visible and can be selected. However, NRSPCA functionality is only
supported for Release 15.0 onwards.
all
Configures the SGSN to allow or to restrict NRPCA for calls within all location areas.
location-area-list instance instance
Selects a pre-defined list of location area codes (LACs) and allows/restricts the NRPCA procedure for calls
within the listed area codes.
within the listed area codes.
instance
: Enter a list ID; an integer between 1 and 5.
Important:
Before using this keyword, ensure that the appropriate LAC information has been defined with the
location-area-list
command, also in this configuration mode.
failure-codes code
Enter an integer from 192 to 226 to identify the GTPP failure cause code (from 3GPP TS29.060, list below)
to be included in the reject messages when NRPCA is restricted. If a failure cause code is not defined, the
default value is 200 (service not supported).
to be included in the reject messages when NRPCA is restricted. If a failure cause code is not defined, the
default value is 200 (service not supported).
192 - Non-existent
193 - Invalid message format
194 - IMSI not known
195 - MS is GPRS Detached
196 - MS is not GPRS Responding
197 - MS Refuses
198 - Version not supported
199 - No resources available
200 - Service not supported
201 - Mandatory IE incorrect
202 - Mandatory IE missing
203 - Optional IE incorrect
204 - System failure
205 - Roaming restriction
206 - P-TMSI Signature mismatch
207 - GPRS connection suspended
208 - Authentication failure
209 - User authentication failed
210 - Context not found
211 - All dynamic PDP addresses are occupied
212 - No memory is available