Cisco Cisco ASR 5700

Page of 8994
Call Control Profile Configuration Mode   
▀  qos 
 
 
▄  Command Line Interface Reference, StarOS Release 17 
2048 
   
pre-emption
 
Defines the pre-emption/vulnerability criteria for PDP Contexts imported from SGSN on Gn/Gp:  
 
capability
 
 
may-trigger-pre-emption
: PDP Contexts imported from Gn/Gp SGSN may preempt 
existing bearers. 
 
shall-not-trigger-pre-emption
: PDP Contexts imported from Gn/Gp SGSN shall not 
preempt existing bearers. 
 
vulnerability
 
 
not-pre-emptable
: PDP Contexts imported from Gn/Gp SGSN are not vulnerable to pre-
emption. 
 
pre-emptable
: PDP Contexts imported from Gn/Gp SGSN are vulnerable to pre-emption. 
ue-ambr
 
This keyword enables the operator to configure either the aggregate maximum bit rate stored on the UE (UE 
AMBR) or select the preferred uplink and downlink QoS cap values. 
Important:
  The SGSN only supports the 
ue-ambr
 keyword beginning in Release 16. 
Configures the aggregate maximum bit rate that will be stored on the UE (user equipment).  
 
max-ul mbr-up
: Defines the maximum bit rate for uplink traffic. 
mbr-up
: Enter a value from 1 to 1410065408 (Release 16.1 and higher), or 0 to 1410065408. 
 
max-dl mbr-down
: Defines the maximum bit rate for downlink traffic. 
mbr-down
: Enter a value from 1 to 1410065408 (Release 16.1 and higher), or 0 to 1410065408.  
prefer-as-cap both-hss-and-local { local-when-subscription-not-available | 
minimum | subscription-exceed-reject [ emm-cause-code [ eps-service-disallowed | 
eps-service-not-allowed-in-this-plmn | no-suitable-cell-in-tracking-area | plmn-
not-allowed | roaming-not-allowed-in-this-tracking-area | tracking-area-not-
allowed ] ] }
 
This set of options is only available on the MME. 
Specifies the QoS cap value to use. 
 
local-when-subscription-not-available
: Use the locally configured values if the Home 
Subscriber Server (HSS) does not provide QoS bit rate values. 
 
minimum
: Use the lower of either the locally configured QoS bit rate or the HSS-provided QoS bit rate. 
This will override the HSS provided values if it is greater than the locally configured values, or if the 
HSS does not provide any values. 
 
subscription-exceed-reject
: If the requested QoS bit rate exceeds the locally configured value, 
reject the PDN connection.  
 
emm-cause-code
: Specifies the EPS Mobility Management (EMM) cause code to return when the 
PDN connection is rejected.  
 
eps-service-disallowed
 - Default 
 
eps-service-not-allowed-in-this-plmn