Cisco Cisco ASR 5700

Page of 8994
Call Control Profile Configuration Mode   
▀  re-authenticate 
 
 
▄  Command Line Interface Reference, StarOS Release 17 
2060 
   
re-authenticate 
Enables or disables the re-authentication feature. This command is available in releases 8.1 and higher. 
Product
 
SGSN 
Privilege
 
Security Administrator, Administrator 
Mode
 
Exec > Global Configuration > Call Control Profile Configuration 
configure > call-control-profile profile_name
 
Entering the above command sequence results in the following prompt: 
[local]host_name(config-call-control-profile-profile_name)# 
Syntax
 
re-authenticate [ access-type { gprs | umts } ] 
remove re-authenticate 
remove
 
Including this keyword with the command disables the feature. The feature is disabled by default. 
access-type
 
Defines the type of access to be allowed or restricted. 
 
gprs
 
 
umts
 
If this keyword is not included, then both access types are allowed by default. 
Usage 
Use this command to enable or disable the re-authentication feature, which instructs the SGSN to retry 
authentication with another RAND in situations where failure of the first authentication has occurred. To 
address the introduction of new SIM cards, for security reasons a systematic "last chance" authentication retry 
with a fresh Authentication Vector is needed, particularly in cases where there is an SRES mismatch at 
authentication. 
Example
 
re-authenticate