Cisco Cisco ASR 5700

Page of 8994
  AAA Server Group Configuration Mode Commands 
radius probe-interval  ▀   
 
Command Line Interface Reference, StarOS Release 17  ▄  
 
   
211 
radius probe-interval 
This command configures the time interval between two RADIUS authentication probes. 
Product
 
All 
Privilege
 
Security Administrator, Administrator 
Mode
 
Exec > Global Configuration > Context Configuration > AAA Server Group Configuration 
configure > context context_name > aaa group group_name
 
Entering the above command sequence results in the following prompt: 
[context_name]host_name(config-aaa-group)# 
Syntax
 
radius probe-interval seconds 
default radius probe-interval 
default
 
Configures the default setting. 
seconds
 
Specifies the number of seconds to wait before sending another probe authentication request to a RADIUS 
server. 
seconds
 must be an integer from 1 through 65535. 
Default: 60 
Usage 
Use this command for Interchassis Session Recovery (ICSR) support to set the duration between two 
authentication probes to the RADIUS server. 
Example
 
The following command sets the RADIUS authentication probe interval to 30 seconds. 
radius probe-interval 30