Cisco Cisco ASR 5700

Page of 8994
Channelized Port Configuration Mode Commands   
▀  clock-source 
 
 
▄  Command Line Interface Reference, StarOS Release 17 
2170 
   
clock-source 
This command sets the source of the port’s transmit clock. 
Important:
  This command is only available for releases 8.1 or higher. 
Product
 
SGSN 
Privilege
 
Security Administrator, Administrator 
Mode
 
Exec > Global Configuration > Channelized Port Configuration 
configure > port channelized slot_number/port_number
 
Entering the above command sequence results in the following prompt: 
[local]host_name(config-port-slot_number/port_number)# 
Syntax
 
clock-source { internal-timing | loop-timing } 
default clock-source 
default
 
Using this command combination sets the port clock source to internal timing. 
internal-timing
 
Sets the port clock to derive timing from the recovered receive clock. 
loop-timing
 
Sets the port clock to transmit in sync with the system timing. 
Usage 
Use this command for either SONET or SDH channelized (Frame Relay) ports on the SGSN. 
Example
 
The following command resets the transmit clock source to internal timing. 
default clock-source