Cisco Cisco ASR 5700
Context Configuration Mode Commands A-D
dhcpv6-service ▀
Command Line Interface Reference, StarOS Release 17 ▄
2385
dhcpv6-service
Creates a specified DHCPv6 service name to allow configuration of DHCPv6 service to the current context and enters
the configuration mode for that service.
the configuration mode for that service.
Product
GGSN
P-GW
SAEGW
Privilege
Security Administrator, Administrator
Mode
Exec > Global Configuration > Context Configuration
configure > context context_name
Entering the above command sequence results in the following prompt:
[context_name]host_name(config-ctx)#
Syntax
[ no ]dhcpv6-service service_name [ -noconfirm ]
no
Removes a previously configured DHCPv6 service from the current context.
service_name
Specifies the name of the DHCPv6 service as an alphanumeric string of 1 through 63 characters that is case
sensitive.
sensitive.
Important:
Service names must be unique across all contexts within a chassis.
-noconfirm
Executes the command without any additional prompt and confirmation from the user.
Caution:
If this keyword option is used with
no dhcpv6-service
service_name
command the DHCPv6
service named
service_name
is deleted with all active/inactive subscribers without prompting any warning or
confirmation.
Usage
Use this command to add a DHCPv6 service to a context configured on the system and enter the DHCPv6
Service Configuration Mode.
The DHCPv6 Service Configuration Mode provides parameters that dictate the system’s communication with
one or more of these DHCPv6 servers.
Entering this command results in the following prompt:
Service Configuration Mode.
The DHCPv6 Service Configuration Mode provides parameters that dictate the system’s communication with
one or more of these DHCPv6 servers.
Entering this command results in the following prompt: