Cisco Cisco ASR 5700
Context Configuration Mode Commands E-H
gtpp attribute ▀
Command Line Interface Reference, StarOS Release 17 ▄
2435
node-id-suffix
STRING
Default: Disabled
Specifies the configured Node-ID-Suffix to use in the NodeID field of GTPP CDRs as an alphanumeric string
of 1 through 16 characters. Each Session Manager task generates a unique NodeID string per GTPP context.
Specifies the configured Node-ID-Suffix to use in the NodeID field of GTPP CDRs as an alphanumeric string
of 1 through 16 characters. Each Session Manager task generates a unique NodeID string per GTPP context.
Important:
The NodeID field is a printable string of the
ndddSTRING
format:
n
: The first digit is the Sessmgr
restart counter having a value between 0 and 7.
ddd
: The number of sessmgr instances. Uses the specified NodeID-
suffix in all CDRs. The “Node-ID” field consists of sessMgr Recovery counter (1 digit)
n
+ AAA Manager identifier (3
digits)
ddd
+ the configured Node-Id-suffix (1 to 16 characters)
STRING
. If the centralized LRSN feature is enabled, the
“Node-ID” field will consist of only the specified NodeID-suffix (NodeID-prefix is not included). If this option is not
configured, then GTPP group name will be used instead (For default GTPP groups, context-name will be used).
configured, then GTPP group name will be used instead (For default GTPP groups, context-name will be used).
Important:
If this node-id-suffix is not configured, the GGSN uses the GTPP context name as the Node-id-
suffix (truncated to 16 characters) and the SGSN uses the GTPP group named as the node-id-suffix.
pdn-connection-id
Default: Enabled
This keyword controls the inclusion of the optional field “PDN Connection ID” in the x-CDRs.
This keyword controls the inclusion of the optional field “PDN Connection ID” in the x-CDRs.
pdp-address
Default: Enabled
This keyword controls the inclusion of the optional field “PDP Address” in the x-CDRs.
This keyword controls the inclusion of the optional field “PDP Address” in the x-CDRs.
pdp-type
Default: Enabled
This keyword controls the inclusion of the optional field “PDP Type” in the x-CDRs.
This keyword controls the inclusion of the optional field “PDP Type” in the x-CDRs.
pgw-ipv6-addr
Default: Disabled
Specifying this option allows to configure the P-GW IPv6 address.
Specifying this option allows to configure the P-GW IPv6 address.
Important:
This attribute can be controllably configured in custom24 and custom35 SGW-CDR dictionaries.
pgw-plmn-id
Default: Enabled
This keyword controls the inclusion of the optional field “PGW PLMN-ID” in the x-CDRs.
This keyword controls the inclusion of the optional field “PGW PLMN-ID” in the x-CDRs.
plmn-id [ unknown-use ]
Default: Enabled
For SGSN, reports the SGSN PLMN Identifier value (the RAI) in the S-CDR provided if the dictionary
supports it.
For GGSN, reports the SGSN PLMN Identifier value (the RAI) in the G-CDR if it was originally provided by
the SGSN in the GTP create PDP context request. It is omitted if the SGSN does not supply one.
For SGSN, reports the SGSN PLMN Identifier value (the RAI) in the S-CDR provided if the dictionary
supports it.
For GGSN, reports the SGSN PLMN Identifier value (the RAI) in the G-CDR if it was originally provided by
the SGSN in the GTP create PDP context request. It is omitted if the SGSN does not supply one.