Cisco Cisco ASR 5700

Page of 8994
  Context Configuration Mode Commands E-H 
gtpp egcdr  ▀   
 
Command Line Interface Reference, StarOS Release 17  ▄  
 
   
2453 
gtpp egcdr 
Configures the eG-CDR and P-CDR (P-GW CDR) parameters and triggers. 
Product
 
GGSN 
P-GW 
SAEGW 
Privilege
 
Security Administrator, Administrator 
Mode
 
Exec > Global Configuration > Context Configuration 
configure > context context_name
 
Entering the above command sequence results in the following prompt: 
[context_name]host_name(config-ctx)# 
Syntax
 
gtpp egcdr { closure-reason admin-disconnect [ management-intervention | normal-release ] 
| final-record [ [ include-content-ids { all | only-with-traffic } ] [ closing-cause { 
same-in-all-partials | unique } ] ] | losdv-max-containers 
max_losdv_containers | lotdv-
max-containers 
max_lotdv_containers | dynamic-path ddl-path | rulebase-max-length 
rulebase_name_max_length | service-data-flow threshold { interval interval | volume { 
downlink 
bytes [ uplink bytes ] | total bytes | uplink bytes [ downlink bytes ] } } | 
service-idle-timeout { 0 | 
service_idle_timeout } } 
default gtpp egcdr { closure-reason admin-disconnect | dynamic-path | final-record 
include-content-ids only-with-traffic closing-cause same-in-all-partials | losdv-max-
containers | lotdv-max-containers | service-idle-timeout 0 }
 
no gtpp egcdr { dynamic-path | rulebase-max-length | service-data-flow threshold { 
interval | volume { downlink [ uplink ] | total | uplink [ downlink ] } } }
 
closure-reason admin-disconnect [ management-intervention | normal-release ]
 
Controls the configuration of “causeForRecordClosing” in PGW-CDR when a call is cleared from the 
chassis. 
Releases prior to 14.1, when a call is cleared from the chassis the field “causeForRecordClosing” in a PGW-
CDR shows “Normal Release”. In 15.0 and later releases, the behavior has changed to comply with the 3GPP 
specifications. That is, the default “causeForRecordClosing” in PGW-CDR will be “Management 
Intervention”.  
Important:
  This behavioral change is limited to PGW-CDR Release 8 dictionaries only. 
closing-reason
: Configures the record closing reason for PGW-CDR. 
 
management-intervention
: Specifies to send Management-Intervention as causeForRecordClosing 
in PGW-CDRs. By default, Management-Intervention will be sent as the record closure reason for 
PGW-CDRs.