Cisco Cisco ASR 5700

Page of 8994
Context Configuration Mode Commands E-H   
▀  gtpp timeout 
 
 
▄  Command Line Interface Reference, StarOS Release 17 
2484 
   
gtpp timeout 
Configures the amount of time that must pass with no response before the system re-attempts to communicate with the 
Charging Gateway Function (CGF). 
Product
 
GGSN 
SGSN 
P-GW 
SAEGW 
Privilege
 
Security Administrator, Administrator 
Mode
 
Exec > Global Configuration > Context Configuration 
configure > context context_name
 
Entering the above command sequence results in the following prompt: 
[context_name]host_name(config-ctx)# 
Syntax
 
gtpp timeout time 
default gtpp timeout 
default
 
Configures this command with the default setting. Default: 20 seconds 
time
 
Specifies the maximum amount of time (in seconds) the system waits for a response from the CGF before 
assuming the packet is lost. 
time
 is an integer from 1 through 60. 
Usage 
This command works in conjunction with the 
gtpp max-retries
 command to establish a limit on the 
number of times that communication with a CGF is attempted before a failure is logged. 
This parameter specifies the time between retries. 
Example
 
The following command configures a retry timeout of 
30
 seconds: 
gtpp timeout 30