Cisco Cisco ASR 5700

Page of 8994
ACS Bandwidth Policy Configuration Mode Commands   
▀  flow limit-for-bandwidth 
 
 
▄  Command Line Interface Reference, StarOS Release 17 
382 
   
flow limit-for-bandwidth 
This command allows you to configure the flow limit-for-bandwidth parameter for the current bandwidth policy. 
Product
 
ACS 
Privilege
 
Security Administrator, Administrator 
Mode
 
Exec > ACS Configuration > Bandwidth Policy Configuration 
active-charging service service_name > bandwidth-policy policy_name
 
Entering the above command sequence results in the following prompt: 
[local]host_name(config-bandwidth-policy)# 
Syntax
 
flow limit-for-bandwidth id bandwidth_id group-id group_id 
no flow limit-for-bandwidth id bandwidth_id 
no
 
If previously configured, removes the specified flow limit-for-bandwidth configuration in the current 
bandwidth policy. 
id bandwidth_id
 
Specifies ID for the current bandwidth policy. 
bandwidth_id
 must be an integer from 1 through 65535. 
group-id group_id
 
Specifies group ID for the current bandwidth policy. 
group_id
 must be an integer from 1 through 65535. 
Usage 
Use this command to configure the flow limit-for-bandwidth configuration for a bandwidth policy. 
Example
 
The following command configures the Flow Limit-for-Bandwidth configuration with bandwidth policy ID 
test123
 and group ID 
123
flow limit-for-bandwidth id test123 group-id 123