Cisco Cisco ASR 5700
ACS Rulebase Configuration Mode Commands
billing-records ▀
Command Line Interface Reference, StarOS Release 17 ▄
649
udr udr-format udr_format_name
Generates UDRs with specified the format on the occurrence of an interim trigger condition, at the end of a
subscriber session, or a handoff.
subscriber session, or a handoff.
udr_format_name
must be the name of an UDR format, and must be an alphanumeric string of 1 through
63 characters.
+
Indicates that more than one of the keywords can be entered in a single command.
Usage
Use this command to generate enhanced G-CDRs (eG-CDRs), P-GW-CDR for P-GW, RADIUS CDRs
and/or UDRs for billing records. The format of eG-CDRs for the default GTPP group is controlled by the
and/or UDRs for billing records. The format of eG-CDRs for the default GTPP group is controlled by the
inspector
command in the Context Configuration Mode.
If, in the APN configuration, the “accounting-mode” is set as default (GTPP), and in the rulebase
configuration “billing-records egcdr” is configured, both G-CDRs and eG-CDRs are generated if configured.
If, in the APN, the accounting-mode is set to “none” G-CDRs will not be generated.
configuration “billing-records egcdr” is configured, both G-CDRs and eG-CDRs are generated if configured.
If, in the APN, the accounting-mode is set to “none” G-CDRs will not be generated.
Example
The following command sets the billing record to UDR with UDR format named
udr_format1
:
billing-records udr udr-format udr_format1