Cisco Cisco ASR 5700

Page of 8994
ACS Rulebase Configuration Mode Commands   
▀  tcp mss 
 
 
▄  Command Line Interface Reference, StarOS Release 17 
764 
   
tcp mss 
This command allows you to configure the TCP Maximum Segment Size (MSS) in TCP SYN packets. 
Important:
  This command is only available in StarOS 8.1 and later releases. 
Product
 
ACS 
Privilege
 
Security Administrator, Administrator 
Mode
 
Exec > ACS Configuration > Rulebase Configuration 
active-charging service service_name > rulebase rulebase_name
 
Entering the above command sequence results in the following prompt: 
[local]host_name(config-rule-base)# 
Syntax
 
tcp mss tcp_mss { add-if-not-present | limit-if-present } + 
{ default | no } tcp mss 
default
 
Configures this command with its default setting. 
Default: Disabled 
no
 
If previously configured, deletes the TCP MSS configuration from the current rulebase. 
tcp mss tcp_mss
 
Specifies the TCP MSS. 
tcp_mss
 must be an integer from 496 through 65535. 
add-if-not-present
 
Specifies to add the TCP MSS if not present in the packet. 
limit-if-present
 
Specifies to limit the TCP MSS if present in the packet. 
Usage 
Using this command, TCP MSS can be limited if already present in the TCP SYN packets. If there are no 
errors detected in IP header/TCP mandatory header and there are no memory allocation failures, TCP