Cisco Cisco ASR 5700

 

This command allows you to enable/disable TCP Proxy mode for all subscribers using the current rulebase. 

 

ACS 

CF 

MVG 

 

Security Administrator, Administrator 

 

Exec > ACS Configuration > Rulebase Configuration 

active-charging service service_name > rulebase rulebase_name

 

Entering the above command sequence results in the following prompt: 

[local]host_name(config-rule-base)# 

 

tcp proxy-mode { dynamic { all | content-filtering | dcca | ip-readdressing | nexthop-
readdressing | xheader-insert } + | static [ port [ port_number [ to port_number ] ] ] } 

default tcp proxy-mode 

no tcp proxy-mode [ dynamic { content-filtering | dcca | ip-readdressing | nexthop-
readdressing | xheader-insert } + | static [ port [ port_number [ to port_number ] ] ] ] 

 

Configures this command with its default setting. 
Default: Disabled 

 

If previously enabled, disables TCP Proxy mode. 
Optionally, TCP Proxy can be disabled for specific options that were previously enabled. 

 

Enables TCP proxy for subscriber-initiated TCP flows under the specified condition(s). 



 

: Specifies that subscriber-initiated TCP flows be proxied if all/any of the following conditions are 

satisfied. 



 

: Specifies that subscriber-initiated TCP flows be proxied if a URL is requested, 

and that URL is checked because Category-based Content Filtering is enabled in the rulebase. 



 

: Specifies that subscriber-initiated TCP flows be proxied if DCCA is enabled in the charging 

action. 



 

: Specifies that subscriber-initiated TCP flows be proxied if IP Readdressing feature 

is enabled in the charging action.