Cisco Cisco Packet Data Gateway (PDG)
HNB-GW Service Configuration Mode Commands
▀ security-gateway bind
▄ Command Line Interface Reference, StarOS Release 17
6404
The HNB-GW passes the IP address during setting up the HNB-GW discovery procedure with the Home-
NodeB.
NodeB.
Caution:
This is a critical configuration. The HNB-GW service cannot be started without this configuration.
Any change to this configuration would lead to restarting the HNB-GW service and removing or disabling this
configuration stops the HNB-GW service.
configuration stops the HNB-GW service.
Example
The following command binds the logical IP interface with the address of
10.2.3.4
to the HNB-GW service
using existing IPsec Crypto-Map template
crypto1
to establish IPSec tunnel with Home-NodeB:
security-gateway bind address 10.2.3.4 crypto-template crypto1
The following command disables a binding that was previously configured:
security-gateway bind address 12.34.44.56