Cisco Cisco Packet Data Interworking Function (PDIF)
Context Configuration Mode Commands E-H
▀ gtpp storage-server timeout
▄ Command Line Interface Reference, StarOS Release 17
2480
gtpp storage-server timeout
Configures the amount of time that must pass with no response before the system re-attempts to communicate with the
GTPP back-up storage server.
GTPP back-up storage server.
Product
GGSN
P-GW
SAEGW
Privilege
Security Administrator, Administrator
Mode
Exec > Global Configuration > Context Configuration
configure > context context_name
Entering the above command sequence results in the following prompt:
[context_name]host_name(config-ctx)#
Syntax
gtpp storage-server timeout duration
default gtpp storage-server timeout
default
Configures this command with the default setting.
Default: 30 seconds
Default: 30 seconds
duration
Specifies the maximum amount of time (in seconds) the system waits for a response from the GTPP back-up
storage server before assuming the packet is lost.
storage server before assuming the packet is lost.
duration
is an integer from 30 through 120.
Usage
This command works in conjunction with the
gtpp storage-server max-retries
command to
establish a limit on the number of times that communication with a GTPP back-up storage server is attempted
before a failure is logged. This parameter specifies the time between retries.
before a failure is logged. This parameter specifies the time between retries.
Example
The following command configures a retry timeout of
60
seconds:
gtpp storage-server timeout 60