Cisco Cisco Tunnel Terminating Gateway (TTG)
Call Control Profile Configuration Mode
▀ network-feature-support-ie
▄ Command Line Interface Reference, StarOS Release 16
1966
network-feature-support-ie
Configures support for the IMS Voice over Packet-Switched indication and Homogenous Support of IMS Voice over
PS indication.
PS indication.
Product
MME
Privilege
Administrator
Mode
Exec > Global Configuration > Call Control Profile Configuration
configure > call-control-profile profile_name
Entering the above command sequence results in the following prompt:
[local]host_name(config-call-control-profile-profile_name)#
Syntax
network-feature-support-ie ims-voice-over-ps { not-supported | supported }
remove network-feature-support-ie
remove
Disables support for Voice over PS.
ims-voice-over-ps { not-supported | supported }
Enables support for Voice over PS in all Tracking Areas.
not-supported
: Configures the MME to add the "Homogenous Support of IMS Voice over PS Sessions"
AVP to the S6a Update-Location-Request and Notify Request messages to the HSS, with the value set to
“Not Supported”. This indicates that IMS Voice over PS is not supported in any Tracking Areas.
“Not Supported”. This indicates that IMS Voice over PS is not supported in any Tracking Areas.
supported
: Configures the MME to add the "Homogenous Support of IMS Voice over PS Sessions" AVP to
the S6a Update-Location-Request and Notify Request messages to the HSS, with the value set to
“Supported”. This indicates that IMS Voice over PS is supported in all Tracking Areas.
If the command is entered without either the
“Supported”. This indicates that IMS Voice over PS is supported in all Tracking Areas.
If the command is entered without either the
supported
or
not-supported
keywords, the AVP will not be
sent.
Usage
Use this command to include the “IMS Voice over PS” indication, thereby indicating support for IMS Voice
over PS sessions for all Tracking Areas.
This command also configures whether to include the “Homogenous Support of IMS Voice over PS
Sessions” indication as well as the included in the indication, either supported or not supported.
over PS sessions for all Tracking Areas.
This command also configures whether to include the “Homogenous Support of IMS Voice over PS
Sessions” indication as well as the included in the indication, either supported or not supported.
Example
The following command enables support for IMS Voice over PS on the MME:
network-feature-support-ie ims-voice-over-ps