Cisco Cisco Packet Data Gateway (PDG)
GGSN CDR Field Reference
CDR Fields Supported in eG-CDRs ▀
GTPP Interface Administration and Reference, StarOS Release 17 ▄
141
Field
Tag
number
number
Category
Description
Format
Size in
Byte
Byte
ASN1
Code
Code
Time Quota
Mechanism
Mechanism
34-0-22 O
Time Quota Mechanism contains two further
subfields and is included if envelope reporting
is required:
subfields and is included if envelope reporting
is required:
Time Quota Type identifies the
mechanism by which time-based
usage should be reported - as defined
in TS 32.299.
mechanism by which time-based
usage should be reported - as defined
in TS 32.299.
Base Time Interval identifies the
length of the base time interval, for
controlling the reporting of time based
usage, in seconds
length of the base time interval, for
controlling the reporting of time based
usage, in seconds
Sequence
Variable
length
length
96
Notes:
LOTV related changes:
A new IE is included for LOTV container i.e. User location information.
The list of traffic data volumes now supports RAI and CGI/SAI changes, i.e. whenever RAI and/or
CGI/SAI changes are detected; it will result in a “List of Traffic Data Volumes” container being added
to the CDR, if location reporting is required and a report of CGI/SAI change is received.
to the CDR, if location reporting is required and a report of CGI/SAI change is received.
LOSDV related changes:
Time Quota mechanism: Contains two further subfields and is included if envelope reporting is
required:
Time Quota Type identifies the mechanism by which time-based usage should be reported —
as defined in TS 32.299.
Base Time Interval identifies the length of the base time interval, for controlling the reporting
of time-based usage, in seconds.
User location information will be included in the LOSDV container in the R7 eG-CDRs.
The “Service Change Condition” cause changes are as follows:
Time limit eG-CDRs where the corresponding service change condition now has been changed
to “Time Limit”. Earlier there was no specific service change condition and instead “Time
Exhausted” was used.
Exhausted” was used.
Volume limit eG-CDRs where the corresponding service change condition now has been
changed to “Volume Limit”. Earlier there was no specific service change condition and
instead “Volume Exhausted” was used.
instead “Volume Exhausted” was used.
eG-CDRs that are generated as a result of MS-TimeZone change will have service change
condition as “Record closure”.
custom19 dictionary has Rel. 7 related changes.
The field “Served PDP PDN Address Extension”(servedPDPPDNAddressExt) is not part of the 3GPP 32.298
v8.5.0 specification. This field will be available in the CDR only when the CLI command
gtpp attribute
served-pdp-pdn-address-extension
is configured in the GTPP Server Group Configuration Mode. This
field is disabled by default. For more information on this command, refer to the Command Line Interface
Reference.
Reference.