Cisco Cisco Aironet 350 Wireless LAN Client Adapter Release Notes

This document describes system requirements, important notes, installation and upgrade procedures, and 
caveats for Cisco Aironet Client Administration Utility (ACAU) version 2.6.

ACAU is a utility used by administrators to set software installation options and create profiles (saved 
configurations) for users who install Cisco Aironet CB21AG and PI21AG Wireless LAN Client Adapters 
in computers running the Windows 2000 or Windows XP operating system. Administrators save the 
installation settings and profiles to a configuration file. Then when the user installs the client adapter 
software (driver and client utilities), the Install Wizard uses the instructions in the configuration file to 
govern the installation and setup of the client utilities and load one or more preconfigured user profiles. 
Administrators can create configuration files to control the installation and configuration of client 
adapters for one user or groups of users.

To ensure proper operation, use ACAU 2.6 only with client adapter Install Wizard 2.6.

You need the following items in order to install and use ACAU 2.6:

A computer running the Windows 2000 or XP operating system

Cisco recommends a 300-MHz (or greater) processor.

Windows XP support does not include Windows XP Embedded.

Service Pack 2 for Windows XP

20 MB of free hard disk space (minimum)

128 MB of RAM or greater (recommended)

ACAU 2.6 is compatible with only the Cisco Aironet CB21AG and PI21AG client adapters.

To ensure proper operation, the Novell Client (if used) must be installed on the user’s computer prior to 
the client adapter software.