Cisco Cisco Mobility Unified Reporting
MURAL
3.
Click
LUNs
4.
Highlight the destination LUN
5.
Click
Properties
The EMC Web UI shows the unique ID.
For the WWID, remove the separator ':' from the unique ID and prefix the
complete unique ID with 3, for example:
360060160c7102f004887f4015d49e212
To compare to the LUN WWID with the LUNs that were set up during the ori-
ginal installation, refer to the mural.xml configuration file on the GMS. We
are assuming here that LUN isn’t faulty and previous LUN has been assigned
to the new node as well.
7.
Stop all other modules interacting with the Insta node:
a.
Log into master Collector blade of this setup, go to the oozie subshell,
and stop all jobs:
host [cluster: master]>
en
host [cluster: master]#
conf t
host [cluster: master](config)#
pmx subshell subshell-
name
pm extension (subshell-name)>
stop jobname all
pm extension (subshell-name)>
show coordinator RUNNING
jobs
Note: This command will take approximately 5-10 minutes to stop all
jobs.
b.
Log into the master UI node and stop the Rubix process:
#
conf t
(config) #
pm process rubix terminate
c.
Repeat this on the standby UI node.
d.
Stop insta processes on the master Insta node:
Copyright © 2015, Cisco Systems, Inc.
249