Cisco Cisco ASR 5000
MURAL Software Standard Installation Guide
The system displays the "Manufacture done" message and returns to the
#
prompt once the manufacturing of a blade is completed.
13.
Deselect the ISO image selected in step 7. Type
reboot
to reboot the
node with the new ISO image.
Set Up the Master GMS Node
To set up the master GMS node, perform the following steps:
1.
Log in to the GMS node using the Console.
2.
Set the password:
>
en
#
conf t
(config) #
username admin password admin@123
(config) #
write memory
(config) #
exit
Copyright © 2016, Cisco Systems, Inc.
20