Cisco Cisco ASR 5000
MURAL Software Standard Installation Guide
A blade takes approximately 30 to 45 minutes to manufacture with the
new image. Run the following command to check the blade
manufacture status.
(config) #
gms show manufacturing-status cluster <Cluster
Name>
The following example illustrates the PXE boot status for nodes under
specific cluster:
(config) #
gms show manufacturing-status cluster DN-CLUS
UCS-DN-1: OK : Product release: 3.8
UCS-DN-2: OK : Product release: 3.8
(config) #
The following example illustrates the PXE boot status for all the nodes:
(config) #
gms show manufacturing-status all
Collect Storage Information and Update the CIQ Sheet
Once all the blades are manufactured successfully, configure storage LUNs for
each blade as described in the
MURAL Hardware Installation Guide.
To collect storage information:
1.
Log in to each node and run the following commands:
>
en
#
conf t
(config) #
reload
2.
Wait for the node to complete reboot, login and execute the following
command to collect the WWID:
(config) #
tps multipath show
Update these WWIDs into storageInfo worksheet of CIQ sheet for the
respective node.
3.
Repeat the preceding steps for all the blades, including the GMS node.
25
Copyright © 2016, Cisco Systems, Inc.