Cisco Cisco ASR 5000

MURAL Software Standard Installation Guide

The first column displays the rule number. To remove the rule,

execute the following command:

cli -m config -t "no ip filter chain INPUT rule <rule-

number>”

cli -m config -t “wr me”

Repeat this step for all the rule that need to be deleted. For example,

cli -m config -t "no ip filter chain INPUT rule 71”

cli -m config -t "no ip filter chain INPUT rule 75”

cli -m config -t “wr me”

Log into the master Collector node and run the data processing commands

from the Oozie subshell:

conf t

(config)#

pmx

Welcome to pmx configuration environment.

pm extension>

subshell oozie

pm extension (oozie)>

run job all

The command output shows all the jobs that were initiated and if the jobs

started successfully or not.

Note:

It may take approximately 20 minutes to start all the jobs,

depending upon what all applications are enabled.

Validating Data on the Compute Blades (Data Nodes)

This section includes the steps required to validate data on the Compute blades

(Data nodes) following the installation process.

Caution:

Wait two hours after completing the steps in

. This allows sufficient time for the jobs that process the

collector data to start, and the

done.txt

files to be updated. Not waiting could

result in the checks failing.