Cisco Cisco ASR 5000
MURAL Software Standard Installation Guide
1.
Log in to the master UI node.
>
en
#
conf t
(config)#
rubix modify-app rge set adv-attribute
rubixReportQueueMax value 1
(config)#
write memory
2.
Run the following commands to start the EDR process.
(config)#
pm process rubix restart
(config)#
rubix modify-app atlas enable
(config)#
rubix modify-app atlas modify-instance 1 enable
(config)#
write memory
Check the tomcat process status using command:
(config)#
rubix status application atlas
Note:
Ensure the running status of above service as
Current Status:
running
before proceeding to start next process.
3.
Run the following commands to start the other processes:
>
en
#
conf t
(config)#
pm process rubix restart
(config)#
rubix modify-app ApplicationName enable
(config)#
rubix modify-app ApplicationName modify-instance 1 enable
(config)#
write memory
Where
ApplicationName
is replaced by the following applications in the
same order:
l
bulkstats
l
reportAtlas
l
rge
l
ruleEngine (if Anomaly or BulkStat is enabled)
Copyright © 2016, Cisco Systems, Inc.
64