Cisco Cisco ASR 5000
SGSN Service Configuration Procedures
Configuring IDFT for Connected Mode Handover (S4 Only, Optional) ▀
SGSN Administration Guide, StarOS Release 18 ▄
rnc id <rnc_id>
no enb-direct-data-forward
end
Where:
no enb-direct-data-forward
enables the setup of IDFT between the eNodeB and the RNC via the SGW
for connected mode inter RAT handovers. If IDFT is enabled, the SGSN/MME will send the IDFT request
towards the SGW. Once enabled, the SGSN/MME will send IDFT requests towards the SGW.
towards the SGW. Once enabled, the SGSN/MME will send IDFT requests towards the SGW.
To disable IDFT, enter the
enb-direct-data-forward
command.