Cisco Cisco ASR 5000
3G-2G Location Change Reporting
Configuring Location Change Reporting ▀
SGSN Administration Guide, StarOS Release 18 ▄
Configuring Location Change Reporting
By default, Location Change Reporting is disabled. Reporting to the GGSN is easily enabled in the Call Control Profile
configuration mode.
configuration mode.
The following configuration enables this feature:
config
call-control-profile <cc_profile_name>
location-reporting { gprs | umts }
exit
Notes:
The command can be repeated to enable location change reporting for GPRS (2G) and UMTS (3G).
The following configuration disables this feature:
config
call-control-profile <cc_profile_name>
remove location-reporting { gprs | umts }
exit
Notes:
Using the
remove
keyword with the command disables the feature.
Verifying the Location Change Reporting Configuration
This section explains how to display the configuration after saving it in the .cfg file as described in the System
Administration Guide.
Administration Guide.
Verification for the call control profile configuration is accomplished via the corresponding show command in Exec
Mode:
Mode:
show call-control-profile
[local]S4SGSN_Sim# show call-control-profile full name ccprof1
Call Control Profile Name = ccprof1
Accounting Mode (SGW) : None
GPRS Attach All : Allow
GPRS Attach All Failure Code : 14