Cisco Cisco ASR 5000
Attach Rate Throttling
Configuring the Attach Rate Throttling Feature ▀
SGSN Administration Guide, StarOS Release 18 ▄
Configuring the Attach Rate Throttling Feature
The following command is used to configure the Attach Rate Throttling feature, this command configures an attach rate
throttle mechanism to control the number of new connections (attaches or inter-SGSN RAUs), through the SGSN, on a
per second basis:
throttle mechanism to control the number of new connections (attaches or inter-SGSN RAUs), through the SGSN, on a
per second basis:
config
network-overload-protection sgsn-new-connections-per-second #_new_connections action {
drop | reject with cause { congestion | network failure } } [ queue-size queue_size ] [
wait-time wait_time ] default network-overload-protection sgsn-new-connections-per-
second
drop | reject with cause { congestion | network failure } } [ queue-size queue_size ] [
wait-time wait_time ] default network-overload-protection sgsn-new-connections-per-
second
exit
Notes:
The default mode of the command disables the Attach Rate Throttling feature.
For detailed information on the command see, Cisco ASR 5x00 Command Line Interface Reference.