Cisco Cisco ASR 5000
Direct Tunnelling for the S4-SGSN
▀ Configuring Direct Tunnel on an S4-SGSN
▄ SGSN Administration Guide, StarOS Release 18
Verifying the Call-Control Profile Configuration
Use the following command to display and verify the direct tunnel configuration for the call-control profiles:
show call-control-profile full name <profile_name>
The output of this command displays all of the configuration, including direct tunnel for the specified call-control
profile.
profile.
Call Control Profile Name = ccprofile1
...
Re-Authentication : Disabled
Direct Tunnel : Not Restricted
GTPU Fast Path : Disabled
..
Verifying the RNC Configuration
Use the following command to display and verify the direct tunnel configuration in the RNC configuration:
show iups-service name <service_name>
The output of this command displays all of the configuration, including direct tunnel for the specified IuPS service.
IService name : iups1
...
Available RNC:
Rnc-Id : 1
Direct Tunnel : Not Restricted