Cisco Cisco ASR 5000
MOCN for 2G SGSN
▀ Configuring 2G MOCN
▄ SGSN Administration Guide, StarOS Release 18
CS/PS Co-ordination roamer : <Enabled/Disabled>
CS/PS Co-ordination failcode : <valid gmm cause>
network-sharing failure-code
The following command sequence sets the failure code that is used by GPRS MOCN if no failure cause is available
when the SGSN sends an Attach/RAU Reject message
when the SGSN sends an Attach/RAU Reject message
config
context ctxt_name
gprs-service gprs_srvc_name
network-sharing failure-code gmm-cause
end
Default network sharing failure-code is 7.
Verifying Failure Code Configuration
From the Exec mode, run the
show gprs-service name
command and look for the following line:
Network-sharing Failure-code : <gmm-cause>